Novation resources
Powering up in BootLoader mode
| Device | Instructions |
|---|
| Bass Station II | Hold the ‘Save’, ‘Patch left’ and ‘Patch right’ buttons while powering on the Bass Station II |
| Circuit | Hold the ‘Scales’, ‘Notes’ and ‘Velocity’ buttons while powering on the Circuit. |
| Circuit Mono Station | Hold the ‘Scales’, ‘Notes’ and ‘Velocity’ buttons while powering on the Circuit Mono Station. |
| Peak | Hold the three buttons to the left of the LCD screen whole powering on Peak. |
| Summit | Hold the three buttons to the left of the LCD screen whole powering on Summit. |
| SL MKIII | Hold the ‘Octave +’ and ‘Octave -’ buttons while powering on the SL MKIII. |
| Launchkey Mini MK3 | Hold ‘Transpose’, ‘Octave +’ and ‘Octave -’ while plugging in the USB cable. |
| Launchpad Mini MK3 | Hold User while connecting the USB cable. |
| Launchpad X | Hold the Capture MIDI button while connecting the USB cable. |
| Launchpad Pro MK3 | Hold down the Setup button while plugging in the USB cable. |
source: https://support.novationmusic.com/hc/en-gb/articles/360002211360-I-am-unable-to-update-my-device-using-Novation-Components
Bass-Station II wheels calibration
- Hold down Save + Patch/Value Left & Patch/Value Right whilst turning the power switch on. The screen will show btl.
- Press right arrow three times so the screen shows cAL. Press Save once.
- Move the Pitch wheel to the bottom and hold. Press Save.
- Centre the Pitch wheel and press Save.
- Move Pitch wheel to the top and press Save.
- The screen will now show cbt.
- Move Mod wheel to the bottom and press Save.
- Move Mod wheel to the top and press Save.
- The screen will now show cAL again.
- Power cycle the Bass Station II.
source: https://support.novationmusic.com/hc/en-gb/articles/206862299-How-To-Calibrate-The-Pitch-And-Mod-Wheels-On-Bass-Station-II