LinnStrument "Hidden" Settings

Most hidden settings are accessed by holding a pad/button longer than 1/2 second.
Setting numerical values is done by swiping right and left.
If there are several numerical values (e.g. high and low limits), selecting them is by swiping up or down.

Press PER-SPLIT SETTINGS button to enter per-split settings.

column	setting	”hidden” setting
MIDI MODE	ChPerNote	hold button longer —> Force MPE Settings
MIDI MODE	ChPerRow	hold button longer —> Reverse Row Order
BEND RANGE	+/-24	hold button longer —> Any Bend Range
PITCH/X	Row 5	—> Reset On Release
TIMBRE/Y	On	hold button longer —> High/Low Limits
TIMBRE/Y	CC74	hold button longer —> Message select (any CC number and poly and channel pressure)
TIMBRE/Y	Relative	hold button longer —> Initial Value
LOUDNESS/Z	On	hold button longer —> High/Low Limits and 7/14 bit
LOUDNESS/Z	CC11	hold button longer —> CC select
COLOR	Played	hold button longer —> Light Animations for played pad (16 different)
LOW ROW	X=CC1	hold button longer —> mode (hold or fader) and CC select (or channel pressure)
LOW ROW	XYZ=CC16-18	hold button longer —> mode (hold or fader) and 3 times CC select (or channel pressure)
SPECIAL	CC Faders	hold button longer —> 8 times CC select (select via right edge pads)

Press GLOBAL SETTINGS button to enter global settings.

column	setting	”hidden” setting
VIEW		Row 4 —> Left Hand Mode (Pads can be indidually colored, by sending CC20=column, CC21=row, CC22=color to LinnStrument)
ROW OFFSET	+Octave	hold button longer —> Any row offset
ROW OFFSET	Guitar	hold button longer —> Independent row tunings (select row by pad on right)
ROW OFFSET		No selection —> no offset
SELECT SW	Foot R and Foot L together —> virtual third foot switch, actuated by pressing both foot switches together (action is upon release then)
ASSIGN SW	Tap Tempo	hold button longer —> Extra switch assignments:
		--- Legato, Arpeggiator Latch, Preset +/-, Pitch slide on/off
		--- In addition, only for foot switches: LinnStrument sequencer control: play, previous, next, clock, mute
VELOCITY SENS	High	hold button longer —> High/Low Limits
VELOCITY SENS	Fixed	hold button longer —> fixed value
		special: hold button “Actions Calibration” while tapping button “Pressure Sensitivity Medium” —> Touch Sensor Prescale
POWER/MIDI	MIDI Jacks	hold button longer —> swipe to select THRU —> MIDI Thru
POWER/MIDI	USB	hold button longer —> USB MIDI Data Reduction
POWER/MIDI	Sleep	hold button longer —> Sleep display select & Timer select (sleep after n minutes of inactivity)

Note pads in column 1 through 16 of the top row —> Audience Messages (hold longer —> edit mode for these texts) |

to:	do:
Toggle Left/Right	press Split
Change sequence length (end step)	Hold Settings (Switch 1) while pressing the desired end step in the Step Select Bar (left side of lower row)
Note edit	Hold note for longer, or Step Select Bar (if more thare one note on step, these are rotated through)
Leave note edit	Press unlit are (middle column/s)
Jump to step	Hold Play (Switch 2) while pressing step in Step Select Bar
Play only viewed sequence track	Hold Settings (Switch 1 - TYPO) while pressing Play (Switch 2)

Sequencer Settings:

Lower row switches between 4 settings screens:

1 - project save/load (hold project pad longer to save; tap to load)
2 and 3 - drum view note numbers (select row in left column; select right/left split with top row right)
4 - Step Select Bar colors (empty / filled / after end - 2 identically coloured pads each)

Preset

Change Instrument Preset (inc/dec or swipe number)
Change LinnStrument “All Settings” preset (hold one of the 6 pads on right for 2 seconds —> save; tap —> load)

Split